【實用生活app】ABB free@home - SmartHome App|最夯免費app-綠色工廠好玩App

The free@home app makes programming and operation of a free@home home automation system possible.

In the configuration area of the app the visualization of the home is created, logic connections between sensors and actuators established, and scenes and time profiles created.

In the operating area of the app the actuators of the system can be remote controlled on the basis of the previously created visualization.

The switchover between the two areas is carried out with the "Toothed-wheel" icon at the top right in the app.

Procedure:

1. Install the "free@home" app on your terminal device.

2. Check whether the left LED of the System Access Point lights up green.

3. If necessary, press the left button and wait until the LED lights up

permanently.

4. In the network settings of your terminal device, set the radio network on "SysAPXXX".

The terminal device will now connect itself directly with the System Access Point.

5. Start the "free@home" app.

6. Tip on your user name and enter your password. If this is your first login, enter the password you have chosen twice.

The app automatically finds the System Access Point of the free@home system, which must be located in the same network, and stores the password. Information about the network settings is located in the 'BRIEF INSTRUCTIONS FOR USERS' which is enclosed with the System Access Point.

Preconditions:

- free@home home automation system including System Access Point