【實用教育app】Bluetooth RN42/41 Programmer|最夯免費app

This app can Program the Bluetooth device

RN42/41 from rover networks and also

send ASCII data in normal mode.

Has many features, ive used so I can

use the module without using another

micro to control.

Read the datasheet first as some of the

commands like power options, can make it

harder to Pair with.

The buttons PI02-PI11 are the HW pins on the

module,When set to outputs a press will set

high.

Device-> this brings up a menu to select

paired devices only

Connect-> This will open a Bluetooth port

with the device.

Features below.

1) Change Baud rate

2) Read IO pins on a timer 150ms

3) Control the HW pins

4) Read all setting information

5) Change power options(Read data sheet!!)

Can get down to 400uA and still connect.

6) Send ASCII commands so can use in data mode

to talk to another device(Normal mode)

7) Enter & Exit command mode.

8) Program Bluetooth name.

You have to Pair first using the android normal

bluetooth menu.

Then select the device from a list, and press

connect.

Now use menu button to bring up the menu

and select enter command mode return "CMD"

if all good.

免費玩Bluetooth RN42/41 Programmer APP玩免費

免費玩Bluetooth RN42/41 Programmer App

Bluetooth RN42/41 Programmer APP LOGO

Bluetooth RN42/41 Programmer APP QRCode