【實用工具app】Call List Pro 2|最夯免費app-綠色工廠好玩App

General: - Connect per WLAN, GPRS, EDGE or UMTS. - All contents can only be showed online. - The call list can only be requested per remote query, not over the internal net http://fritz.box ! - Fritzboxes from 7170 and up will be supported - For a continuous deployment and proper function of the service site can not be guaranteed.- New: DTMF dial with fixed-line phone - New: Callthrough function Use: - Start the program - call up the settings - Enter the data of your Fritzbox - The button'Test' only checks if your Fritzbox can be pinged - Press 'Save' and exit the settings - Press the button 'Calls' - If all data is correct and the Fritzbox is set correct, then you should see the call list Configuration of the Fritzbox: - Establish a free DYNDNS-Account (e.g. at www.dyndns.org) - Enter the data in the Fritzbox: Startpage* > Dynamic DNS - Activate remote servicing: Startpage* > remote servicing - Assign a password of the Fritzbox for internet access (not realy necessary) - Enter all values to the settings of the iPhone program * Startpage: http://fritz.box (Desktop PC: run a Browser) Functions: - Per click on a phone number you can make the call - The program replaces 0 by e.g. +49 - Symbol AB: It is used a complex calculation, but it can happen that this symbol is showed and there is no message left. DTMF Tone dial (from Version 1.2): - Click longer on the time at the right in a row (not on the number) - The row will be marked - Presse "copy" - The number occurs now above in the text field - You can edit the number or enter a new one - Use another fixed-line phone and pick it up so that you can hear the free line signal - The fixed-line phone must support DTMF dialing - Hold the microphone near the speaker of the iPhone - Press the button "DTMF Dial" - The number is now dialed with tone dial. - After a short time you will be connected with the subscriber Callthrough (from Version 1.4) - Usefull if youhave a pricy fixed phone contract and want to phone cost-effective - Enter in the iPhone App the Fritzbox-phone number and PIN - Activate in the Fritzbox the Callthrough function - Clicklonger on the time at the right in a row (not on the number) - The row will be marked - Press "copy" - Now the complete number occurs above - Click on this number and use now the function. Settings for Callthrough in the Fritzbox: - Call http://fritz.box in the Browser - Settings > Extended settings > Telephony > Call forwarding > Callthrough Hint: It works with 'old' and 'new' (SessionID) Firmware, e.g.: 7170: 29.04.70 or higher 7270: 54/74.04.70 or higher 7390: 5.28 or 5.50 or higher 6390: 5.28 or higher and future versions