【實用交通運輸app】Measurement of acceleration|最夯免費app-綠色工廠好玩App

Application for measuring the acceleration, power and torque of your car.

Application uses only the accelerometer!

In the application, you can view graphs of results, as well as export the results in xls-file!

Application, you can measure the following parameters of a vehicle:

- Acceleration time to a predetermined speed;

- The passage of 402m;

- Maximum torque of the engine;

- Maximum engine power;

And engine output torque calculated based on the acceleration and vehicle parameters (weight, transmission gear ratios , and wheel size , etc.)

Accelerometer - very precise and sensitive device ! Accuracy of the results depends on the accuracy of measurement !

Before you start the measurement , go to settings and select the parameters of your vehicle.

INSTRUCTIONS FOR MEASURING ACCELERATION :

1. Fasten the device in a stationary state

2 . Calibrate accelerometer clicking calibrate

3 . After the message " ready to start " can start the measurement starts automatically.

4 . Completion distance measuring over 402 meters , and the result is saved.

INSTRUCTIONS FOR MEASURING MOMENT AND ENGINE POWER :

Measurement of power and torque produced by one gear. Usually works best in second gear . Find out in advance transmission gear ratios in the chosen gear.

1. Enter the configuration parameters of your vehicle.

- The initial velocity measurement select such that it was just above the speed at which you turn your chosen gear.

2 . Fasten the device in a stationary state

2 . Calibrate accelerometer clicking calibrate

3 . After the message " ready to start " start moving smoothly when you turn on the selected gear, fully depress the gas and accelerated to a speed cutoff .

4 . When the speed of the display will be equal to the speed at the speed cutoff measurement is finished, and the result is saved.