【實用工具app】Mifare Classic Tool - MCT|最夯免費app

This is an Android NFC-App for reading, writing, analyzing, etc. Mifare Classic RFID-Tags.

GENERAL INFORMATION

This tool provides several features to interact with (and only with) Mifare Classic RFID-Tags.

It is designed for users who have at least basic familiarity with the Mifare Classic technology.

┏━┫ PLEASE READ ┣━

┃Please read the whole page and make sure you got everything right before rating. Thank you!

┃If you rate with less then 4 stars, please leave a comment why. This way I can improve this app.

┃If you like MCT please consider to buy the donate version.

┃

┃Users and other websites are reporting broken NFC support for different Android 5 builds

┃(HTC One M8/M7). As far as I know there is nothing I can do about it. Sorry.

┗━

FEATURES

• Read Mifare Classic tags

• Save and edit the tag data you read

• Write to Mifare Classic tags (block-wise)

• Clone Mifare Classic tags

(Write dump of a tag to another tag; write 'dump-wise')

• Key management based on dictionary-attack

(Write the keys you know in a file (dictionary).

MCT will try to authenticate with these

keys against all sectors and read as much as possible.)

• Format a tag back to the factory/delivery state

• Write the manufacturer block of special Mifare Classic tags

• Create, edit and save key files (dictionaries)

• Decode & Encode Mifare Classic Value Blocks

• Decode & Encode Mifare Classic Access Conditions

• Compare dumps (Diff Tool)

• Display generic tag information

• Display the tag data as highlighted hex

• Display the tag data as 7-Bit US-ASCII

• Display the Mifare Classic Access Conditions as a table

• Display Mifare Classic Value Blocks as integer

• In-App (offline) help and information

• It's open source (GPLv3) ;)

IMPORTANT NOTES

Some important things are:

• The features this tool provides are very basic. There are no such

fancy things like saving a URL to an RFID-Tag with a nice looking

graphical user interface. If you want so save things on a tag,

you have to input the raw hexadecimal data.

• This App can NOT crack/hack

any Mifare Classic keys. If you want to read/write an RFID-Tag, you

need keys for this specific tag first. For additional information

please read/see Getting Started from the links section.

• There will be no "brute-force" attack

capability in this application. It is way too slow due

to the protocol.

• The first block of the first sector of an original

Mifare Classic tag is read-only i.e. not writable. But there

are special Mifare Classic tags that support writing to the

manufacturer block with a simple write command. This App is able to

write to such tags and can therefore create fully correct clones.

However, some special tags require a special command sequence

to put them into the state where writing to the manufacturer block is possible.

These tags will not work.

Remember this when you are shopping for special tags!

• This app will NOT work on some devices because

their hardware (NFC-controller) does not support Mifare Classic

( https://github.com/ikarus23/MifareClassicTool/issues/1 ).

You can find a list of unsupported devices here:

https://github.com/ikarus23/MifareClassicTool#general-information

LINKS

• Project Page on github:

https://github.com/ikarus23/MifareClassicTool

• MifareClassicTool on F-Droid:

https://f-droid.org/repository/browse/?fdid=de.syss.MifareClassicTool

• Getting started & other help:

https://github.com/ikarus23/MifareClassicTool#getting-started

• Bug tracker:

IF YOU ENCOUNTER A PROBLEM PLEASE REPORT IT HERE

https://github.com/ikarus23/MifareClassicTool/issues

• Additional stuff:

http://publications.icaria.de/mct/

• Thread at the Proxmark3 Forum:

http://www.proxmark.org/forum/viewtopic.php?id=1535

MIFARE is a registered trademark of NXP Semiconductors.

免費玩Mifare Classic Tool - MCT APP玩免費

免費玩Mifare Classic Tool - MCT App

Mifare Classic Tool - MCT APP LOGO

Mifare Classic Tool - MCT APP QRCode