【實用通訊app】Path Profile & RF Propagation|最夯免費app

The Path Profile and RF Propagation Tool bring experience gained in our Radio Propagation Simulator (ComSim) and Mission Planning Aid (Phoenix) to the mobile market.

Overview

Starting with a map-based interface, radio locations are entered and a path profile between two points can then be shown. Radio parameters can then be configured and the link margin calculated to indicate the expected susses of communication.

The RF Propagation analysis covers the range VHF range of 30-88Mhz.

The tool requires Google Maps to be installed and access to the internet.

To Plot a Path Profile:

1. On the Map screen pan to the required radio location.

2. Long Press to set the point on the map.

3. Name the point and select Ok

4. Repeat for other radio locations.

5. Short Press radio locations to assign the To and From points.

6. Select Plot to create a Path Profile.

To calculate the Link Margin for the Path:

1. From the completed Path Profile use the menu by pressing the device’s menu button to configure the Radio Settings and Frequency.

2. Select the Link Info to display the Link Margin; this gives a traffic light indication of Success of Communication.

Disclaimer:

It is your responsibility to verify the accuracy of the results obtained from the tool, Drumgrange accept no liability resulting from how the results are used.

免費玩Path Profile & RF Propagation APP玩免費

免費玩Path Profile & RF Propagation App

Path Profile & RF Propagation APP LOGO

Path Profile & RF Propagation APP QRCode