【實用工具app】Smart4house|最夯免費app-綠色工廠好玩App

Our application is used to display the status of various sensors of the series Smart4house, In this time (Water leak detector, Binary sensor and Temperature sensor). For using this app properly You have to own this Smart4house device!Water leak detectorGuard against condensation, drips, leaks, and flooding. Protect against potential mold and damage. The Smart4House Water Leak Detector alerts you before a disaster happens. Binary sensorThe binary sensor provides convenient state monitoring.Temperature sensorThe S4H-TM-xx temperature sensor is fitted with an internal and external probe and with a 2m long cable. The sensor can be used as a simple temperature probe or as a thermostat with two adjustable temperature limits. Information about temperature is sent from the sensor to the cloud via Wi-Fi and the home AP at 15-min, 30-min, 1-hour, 2-hour or 4-hour intervals. In the thermostat mode, notifications are sent outside of the selected time intervals when the temperature falls below or exceeds the preset limit. Information on the cloud is sent to your smartphone, where you can display it using the Smart4house application as a numeric value or in the form of a diagram. You can use your smartphone to set or change the display mode, message sending intervals or monitored temperature limits. The measuring range of the internal probe is from 0 to +50°C, and the external sensor range is from -30 to +50°C.Wifi relayWifi relay is used for remote control of one or two devices. Its two relays with changeover contacts can be independently and remote switched on or off from your smartphone or tablet.