【實用媒體與影片app】USB External SnapExWebcam|最夯免費app

*ROOT-SUPERUSER, V4L KERNEL, USB HOST SUPPORT REQUIRED SEE BELOW*

*GALAXY NEXUS AND NEXUS 7 KNOWN SUPPORTED*

USB external webcam application that takes a picture or a picture every second in interval mode. Simply attach an OTG (on-the-go) USB adapter to a common webcam* and connect to your smartphone for an external camera system! Uses include a car rear-view backup camera, an extreme sport camera, or a wearable camera to record all your adventures!

*V4L (Video 4 Linux) support is provided by the Android OS (kernel). Every Android device has an OS and may or may not support V4L. If your stock kernel does not support V4L, a V4L enabled kernel can be installed if the device is rooted (see disclaimer and kernel details below).

*Devices must support USB HOST to power the webcam. Most newer devices are enabled.

KNOWN SUPPORTED WEBCAMS:

Logitech Webcam C250

Microsoft LifeCam VX-5000

Uxcell Mini

...

most commercial webcams are likely to work

DISCLAIMER

*The developer publishes this app in good faith, but users assume all risk.Developer has no liability and provides no guarantees. This application requires superuser access and a V4L supported kernel. Modifications to manufacturer systems can void a warranty. Not all webcams may be supported. Most major brands are supported. The webcam may need to be plugged in a few seconds before opening the app to initialize.

KERNEL DETAILS:

!!Warning, only qualified users should attempt these steps as it can get complicated.!!

Required tools: See: http://source.android.com/source/initializing.html

FOR GALAXY NEXUS KERNEL:

1. Get the correct kernel:

$ git clone https://android.googlesource.com/kernel/omap.git

2. Add the following to tuna_defconfig (path: ~/omap/arch/arm/configs)

CONFIG_VIDEO_DEV=y

CONFIG_VIDEO_V4L2_COMMON=y

CONFIG_VIDEO_MEDIA=y

CONFIG_USB_VIDEO_CLASS=y

CONFIG_V4L_USB_DRIVERS=y

CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y

2. Comment out the following to the video Kconfig (path: drivers/media/video/Kconfig):

#source "drivers/media/video/omapgfx/Kconfig"

3. Add permission in ueventd.tuna.rc:

666 to /dev/video0

666 to /dev/video1

Check the developer website for Galaxy Nexus V4L enabled kernel updates.

免費玩USB External SnapExWebcam APP玩免費

免費玩USB External SnapExWebcam App

USB External SnapExWebcam APP LOGO

USB External SnapExWebcam APP QRCode