【實用生產應用app】Call List Pro|最夯免費app-綠色工廠好玩App

General:- Connect per WLAN, GPRS, EDGE or UMTS.- All contents can only be showed online.- The call list can only be requested per remote query, not over the internal net http://fritz.box !- Fritzboxes from 7170 and up will be supported- For a continuous deployment and proper function of the service site can not be guaranteed.- New: DTMF dial with fixed-line phone- New: Callthrough functionUse:- Start the program- call up the settings- Enter the data of your Fritzbox- The button'Test' only checks if your Fritzbox can be pinged- Press 'Save' and exit the settings- Press the button 'Calls'- If all data is correct and the Fritzbox is set correct, then you should see the call listConfiguration of the Fritzbox:- Establish a free DYNDNS-Account (e.g. at www.dyndns.org)- Enter the data in the Fritzbox: Startpage* > Dynamic DNS- Activate remote servicing: Startpage* > remote servicing - Assign a password of the Fritzbox for internet access (not realy necessary)- Enter all values to the settings of the iPhone program* Startpage: http://fritz.box (Desktop PC: run a Browser)Functions:- Per click on a phone number you can make the call- The program replaces 0 by e.g. +49 - Symbol AB: It is used a complex calculation, but it can happen that this symbol is showed and there is no message left.DTMF Tone dial (from Version 1.2):- Click longer on the time at the right in a row (not on the number)- The row will be marked- Presse "copy"- The number occurs now above in the text field- You can edit the number or enter a new one- Use another fixed-line phone and pick it up so that you can hear the free line signal- The fixed-line phone must support DTMF dialing- Hold the microphone near the speaker of the iPhone- Press the button "DTMF Dial"- The number is now dialed with tone dial.- After a short time you will be connected with the subscriberCallthrough (from Version 1.4)- Usefull if youhave a pricy fixed phone contract and want to phone cost-effective- Enter in the iPhone App the Fritzbox-phone number and PIN- Activate in the Fritzbox the Callthrough function- Clicklonger on the time at the right in a row (not on the number)- The row will be marked- Press "copy"- Now the complete number occurs above- Click on this number and use now the function.Settings for Callthrough in the Fritzbox:- Call http://fritz.box in the Browser- Settings > Extended settings > Telephony > Call forwarding > CallthroughHint:It works with 'old' and 'new' (SessionID) Firmware, e.g.: 7170: 29.04.70 or higher7270: 54/74.04.70 or higher7390: 5.28 or 5.50 or higher 6390: 5.28 or higherand future versions